Solution 2: Checking Front USB Ports Connected You can either check the device yourself or take it to the technician to fix it. Along the way, you will come across a troublesome device which will be causing the error message. Repeat this until you have plugged all the USB devices in your computer.Once you have disconnected the devices, plug one device inside and power your computer back on. Disconnect all USB devices from your computer.If you are using cheap keyboards or mice, it is possible that they have a short circuit which may cause the error message to appear in the first place. Solution 1: Diagnosing connecting USB Devicesīefore we open your PC and start checking the USB modules one by one, you should make sure that the USB devices which you are connecting to the PC are working perfectly and there is no problem in them. We will go through all the cases like this one by one and you can check which one fits your case. Either this or some device you are connecting to the USB is damaged etc. If you are trying to use a new motherboard, it is possible that the motherboard is damaged or has a manufacturing fault. It does this to protect your hardware from further damage. This error usually means that the computer has shut down a USB device because of an overloading circuit. This error is quite common and the causes are quite diverse. The error “USB Device over current status detected” usually either when you are building a new PC and powering it on for the first time or when the USB port on your motherboard is damaged.
0 kommentar(er)
